Partial Replacement of Fine Aggregates with Quarry Dust

2018-6-15  alternative to fine aggregate in concrete. In the present investigation workability and strength of concrete was evaluated by replacement of natural sand by Quarry dust and marble powder in equal proportions of 0%, 10%, 20%,

AN EXPERIMENTAL INVESTIGATION ON PARTIAL

2019-11-7  marble dust can effectively be used as fine aggregate replacement (up to50%) without substantial change in strength. Nitisha Sharma the author of a recent paper in this field of articles [3]. As marble powder is the waste product, obtained during the process of sawing and shaping of marble

Utilization of Stone Dust as Fine Aggregate Replacement

2015-4-30  The replacement of fine aggregate with stone dust does not give any harm on strength, it gives beneficial results. But it badly affects the workability on increment level of stone dust. So for maintain workability the dose of concrete was increased which affect the

(PDF) Stone Dust as Partial Replacement of Fine Aggregate

60% and 70% partial replacement of fine aggregate with stone dust has been taken for concrete of M25. grade with 0.46 water cement ratio. In this study, set of cubes and

STUDY OF PARTIAL REPLACEMENT OF FINE AGGREGATE

2018-3-15  3.2 Fine Aggregate: Fine aggregate used in this study is locally availa ble and confirmed to grading zone III as per IS 383-1970.the aggregates whose size is less than 4.75mm. Sand is generally considered to have a lower size l imit of about 0.07mm. The specific gravity of fine aggregate was found out using pycnometer and sieve

(PDF) EXPERIMENTAL STUDY OF FINE AGGREGATE

Experimental programme was conducted using 30%, 40%, 50%, 60% and 70% partial replacement of fine aggregate with stone dust has been taken for concrete of M25 grade with 0.46 water cement ratio.

(PDF) REPLACEMENT OF FINE AGGREGATE WITH SAWDUST

In Group 3, wood waste aggregate has been used as a partial replacement of 10%, 15%, 20%, 25% and 30% by volume of coarse aggregate. The specimens were conditioned for 28-days at 80±5% Relative

(PDF) Stone Dust in Concrete: Effect on Compressive

Concrete of M25 grade was designed for a w/c ratio of 0.48 for the replacement of 10% coarse aggregate with recycled coarse aggregate and replacement of 50, 60 and 70% of fine aggregate

Use of Quarry Dust to Replace Sand in Concrete An

2021-6-4  The function of the fine aggregate is to assist in producing workability and uniformity in the mixture. The river deposits are the most common source of fine aggregate. Now-a-days the natural river sand has become scarce and very costly. Hence we are forced to think of alternative materials. The Quarry dust may be used in the place of river

EFFECT OF GROUNDNUT SHELL ASHAND MARBLE DUST

2016-10-19  10% replacement of Groundnut Shell Ash and Marble Dust with 17.34 N/mm2 strength value for mix ratio 1:2:4 and 20% replacement of Groundnut Shell Ash and Marble Dust with 18.37 N/mm2 strength value for mix ratio 1:11/ 2:3 should be adopted when replacing this admixture with cement. Since all the

AN EXPERIMENTAL INVESTIGATION ON PARTIAL

2019-11-7  marble dust can effectively be used as fine aggregate replacement (up to50%) without substantial change in strength. Nitisha Sharma the author of a recent paper in this field of articles [3]. As marble powder is the waste product, obtained during the process of sawing and shaping of marble

Utilization of Stone Dust as Fine Aggregate Replacement

2015-4-30  The replacement of fine aggregate with stone dust does not give any harm on strength, it gives beneficial results. But it badly affects the workability on increment level of stone dust. So for maintain workability the dose of concrete was increased which affect the

PARTIAL REPLACEMENT OF FINE AGGREGATE WITH

2020-12-18  40%and 50% to be used and marble dust powder percentage 10%, 20%, 30%, 40%and 50% to be used are partially replaced in geo-polymer concrete instead of fine aggregates. 1.1 Materials 1.2.1 Fly ash: Fly ash class F used in this study. 1.2.2 Fine aggregate: Naturally available fine aggregate is used for casting specimens.

An Experimental Investigation on Mechanical Properties

2019-1-23  15% replacement of fine aggregate with marble granules. This trend can be attributed to the marble coarse aggregate and marble dust. The cement use for the experimental studies was Ultratech 43 grade OPC .The various test performed on the cement and their values are shown in the Table 1.

Effect of Partial Replacement of Cement by Fly Ash and

2015-12-1  [1] Bahar Demirel “The Effect of the using waste marble dust as fine sand on the mechanical properties of the concrete ”International journal of physical Science Vol. 5(9),Pp. 1372-1380, 18 August,2010 Quarry dust and Marble sludge powder As Fine Aggregate ” Arpon Journal of Engineering and Applied Science Vol.4,June 2009

(PDF) REPLACEMENT OF FINE AGGREGATE WITH SAWDUST

In Group 3, wood waste aggregate has been used as a partial replacement of 10%, 15%, 20%, 25% and 30% by volume of coarse aggregate. The specimens were conditioned for 28-days at 80±5% Relative

Use of Quarry Dust to Replace Sand in Concrete An

2021-6-4  The function of the fine aggregate is to assist in producing workability and uniformity in the mixture. The river deposits are the most common source of fine aggregate. Now-a-days the natural river sand has become scarce and very costly. Hence we are forced to think of alternative materials. The Quarry dust may be used in the place of river

EFFECT OF FLY ASH AND QUARRY DUST AS A PARTIAL

2018-11-5  EFFECT OF FLY ASH AND QUARRY DUST AS A PARTIAL REPLACEMENT OF CEMENT AND FINE AGGREGATE IN CONCRETE I Rohini 1(Department of Civil, Jeppiar SRR Engineering College, India) V.Arularasi 2(Depatment of civil,Jeppiar SRR engineering College,India) ABSTRACT: FLY ASH CONTAINS THE BASIC INGREDIENTS OF CEMENT LIKE SILICA, MAGNESIUM AND CALCIUM.

EFFECT OF GROUNDNUT SHELL ASHAND MARBLE DUST

2016-10-19  10% replacement of Groundnut Shell Ash and Marble Dust with 17.34 N/mm2 strength value for mix ratio 1:2:4 and 20% replacement of Groundnut Shell Ash and Marble Dust with 18.37 N/mm2 strength value for mix ratio 1:11/ 2:3 should be adopted when replacing this admixture with cement. Since all the

EFFECT OF REPLACING SHARP SAND WITH STONE DUST

2021-4-19  Concrete is very variable material, having a wide range of strengths and stress-strain curve. Concrete composite material whose basic properties are related to the characteristic of constituent element, especially the aggregate. This research aimed to investigate the effect of replacing sharp sand with stone dust as an alternative to only river sand.

AN EXPERIMENTAL INVESTIGATION ON PARTIAL

2019-11-7  marble dust can effectively be used as fine aggregate replacement (up to50%) without substantial change in strength. Nitisha Sharma the author of a recent paper in this field of articles [3]. As marble powder is the waste product, obtained during the process of sawing and shaping of marble

Review on the feasibility of Marble Dust as Replacement

2018-1-22  Earlier analysis conjointly indicate that the consequences of blending marble dust on the different properties of cement like setting times, consistency as well as soundness stay at intervals the appropriate ranges of various standards. It's been used as a replacement of fine aggregates as well as course aggregate in several literature

Replacement of Fine Aggregates by Mixture of Ceramic

2019-7-1  partial and full replacement of fine aggregate by mixture of ceramic and marble powder in equal proportions. The reason for using ceramic and marble as fine aggregates is that both of them are waste materials in the form of broken insulators and marble chippings respectively, with marble powder also possessing cementitious properties.

PARTIAL REPLACEMENT OF FINE AGGREGATE WITH

2020-12-18  40%and 50% to be used and marble dust powder percentage 10%, 20%, 30%, 40%and 50% to be used are partially replaced in geo-polymer concrete instead of fine aggregates. 1.1 Materials 1.2.1 Fly ash: Fly ash class F used in this study. 1.2.2 Fine aggregate: Naturally available fine aggregate is used for casting specimens.

OPTIMUM PARTIAL REPLACEMENT OF CEMENT IN

2018-10-11  investigation,marble dust obtained after processing of marble waste has been used as a filler material i.e. as replacement of fine aggregate. This study investigates the optimum partial replacement of cement in concrete with marble dust in conjunction with super-plasticizers.

Replacement of Fine Aggregate by M-Sand IJSTE

2017-7-7  Replacement of Fine Aggregate by M-Sand Effects of crushed stone dust on some properties of concrete, Cement Concrete Research, vol.26, pp.1121–1130. [2] Hiroshi Uchikawa, 1996, the influence of microstructure on the physical properties of concrete, vol.26, pp.101-111.

Influence of marble waste as partial replacement of fine

2019-12-20  Control concrete mix was designed as per the guidelines of BIS 10262-2009,with a target 28-day compressive strength of 35 MPa.The water-cement ratio of the control mix was kept as 0.5. Further, in the subsequent mixes, marble waste was used as partial replacement of natural river sand.

EFFECT OF FLY ASH AND QUARRY DUST AS A PARTIAL

2018-11-5  EFFECT OF FLY ASH AND QUARRY DUST AS A PARTIAL REPLACEMENT OF CEMENT AND FINE AGGREGATE IN CONCRETE I Rohini 1(Department of Civil, Jeppiar SRR Engineering College, India) V.Arularasi 2(Depatment of civil,Jeppiar SRR engineering College,India) ABSTRACT: FLY ASH CONTAINS THE BASIC INGREDIENTS OF CEMENT LIKE SILICA, MAGNESIUM AND CALCIUM.

Investigation on ceramic waste and stone dust as

2020-8-27  stone dust it gives satisfactory results and upto 40 % of replacement of fine aggregate with stone dust the properties of concrete is found to be enhanced and after that it decreases. 4. Thus we found out the optimum percentage for replacement of stone dust with fine aggregate along with 20% replacement of

EFFECT OF REPLACING SHARP SAND WITH STONE DUST

2021-4-19  Concrete is very variable material, having a wide range of strengths and stress-strain curve. Concrete composite material whose basic properties are related to the characteristic of constituent element, especially the aggregate. This research aimed to investigate the effect of replacing sharp sand with stone dust as an alternative to only river sand.